Oce VarioPrint i Series - Clean the SZ-rollers in the high capacity stacker

Clean the SZ-rollers in the high capacity stacker
When the SZ rollers in the high capacity stacker are polluted, registration and image quality
problems may occur.
[454] Location of the high capacity stackers
Before you begin
You need the following items:
• Cleaning cloths (Alphawipe pads Texwipe TX1004)
• Bottle of process maintenance liquid (PML)
• Socket wrench 5.5
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. ( VarioPrint i-series
consumables on page 332)
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Procedure
Action
1 Open the front door of the high capacity
stacker.
4
Clean the SZ-rollers in the high capacity stacker
Chapter 13 - Maintain the printer
385