Oce VarioPrint i Series - Define System of Measurement

Define system of measurement
1. Open the Settings Editor and go to: [Preferences]→[System settings]→[Regional settings].
[43] [System settings] tab
2. Use the [System of measurement] function to select the system of measurement.
• [Metric]: work with g/m2 and mm.
• [Imperial]: work with lb and inch.
[44] System of measurement
3. Use the [Media weight notation] function to select the media weight notation.
• [Based on chosen system of measurement]: uses the notation as selected in the [System of
measurement] function.
• [Metric]: work with g/m2.
• [Imperial]: work with lb.
[45] Media weight notation
Define system of measurement
66
Chapter 5 - Define defaults