Check the status of the RIP unit
The PRISMAsync Print Server consists of a main controller, two standard RIP units and optional
two additional RIP units. The RIP units are responsible for raster image processing. (
Check the
status of the RIP unit
on page 412)
When one or more RIP units do not communicate with the main controller, the orange RIP
symbol appears in the warning area of the dashboard.
The dashboard shows if RIP units do not communicate with the main controller.
You can hide the warning of the RIP unit that is not responding.
[474] Status of the RIP units
1. Touch [System]→[Controller].
2. Check which RIP unit is not responding.
RIP unit is not responding.
RIP unit is responding.
3. Touch [Hide].
Check the status of the RIP unit
412
Chapter 14 - Problem Solving
To Next Page
Loading...
Need help?
General