Define usage of quality control sheets
Quality control sheets are extra sheets that are printed during a job. (
Learn about quality control
sheets
on page 241)
Configure nozzle failure detection
1. Open the Settings Editor and go to: [Preferences]→[System settings]→[Nozzle failure
detection].
[299] [System settings] tab
2. Use the [Nozzle failure detection] function to enable the nozzle failure detection.
[300] Nozzle failure detection
IMPORTANT
Be aware that the print quality strongly depends on the nozzle failure detection
before you decide to disable the nozzle failure detection.
3. Click [OK].
4. Use the [Interval between failure detection sheets (number of sheets)] function to define the
number of sheets after which a nozzle failure detection sheet is printed.
[301] Nozzle failure detection interval
5. Click [OK].
Define alternate media of quality control sheets
The media definition includes a parameter that indicates if media and media sides are suitable for
quality control sheets. (
Define media optimization parameters
on page 272)
Define usage of quality control sheets
Chapter 9 - Print what you expect
243
To Next Page
Loading...
