Clean the SZ-rollers in the paper path module
When the SZ-rollers in the paper path module are polluted, registration and image quality
problems may occur.
[449] Location of the paper path module
Before you begin
You need the following items:
• Cleaning cloths (Alphawipe pads Texwipe TX1004)
• Bottle of process maintenance liquid (PML)
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. (
VarioPrint i-series
consumables
on page 332)
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Procedure
Action
1 Open the front door of the paper path module.
2 Squeeze the green handles to
open the paper guide.
4
Clean the SZ-rollers in the paper path module
370
Chapter 13 - Maintain the printer
To Next Page
Loading...
Need help?
General