Replace a container in the ink cabinet with drawers
There are two ink cabinet models. This topic describes the replacement of containers in the ink
cabinet with drawers. If the ink cabinet has doors, see
Replace a container in the ink cabinet with
doors
on page 337.
The dashboard indicates when you must prepare the replacement of an empty container. (
Filling
levels of supplies and waste
on page 443)
One of the containers (ink, PML, or ColorGrip liquid) is empty. To know which container
is empty, touch the empty container symbol to go to the [Supplies] pane.
The total supply of one or more liquids is nearly used up.
The total supply of one or more liquids is used up. An action required
screen appears and shows how to replace the empty container.
To learn how the print system processes ink, see
Ink, ColorGrip and maintenance liquid supplies
in the printer
on page 334.
[436] Location of the ink cabinet with drawers
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. (
VarioPrint i-series
consumables
on page 332)
• Keep full containers tightly closed.
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Before you begin
• Take a full container and place the container next to the ink cabinet.
Procedure
Action
1 Use both hands to carefully open the tray of the ink cabinet.
4
Replace a container in the ink cabinet with drawers
340
Chapter 13 - Maintain the printer
To Next Page
Loading...
Need help?
General