Specifications
Printer specifications
General
Specification Value
Type Sheet-fed inkjet digital color press
Resolution 600 x 600 dpi; perceived as 1,200 dpi image quality due to drop
size modulation
Transaction printing mode: 240 dpi, 300 dpi, 600 dpi, or automati-
cally detected
Inkjet technology Drop-on-demand; piezoelectric ink technology
Print speed VarioPrint i300 A4: 300 ipm
LTR: 294 ipm
Print speed VarioPrint i200 A4: 200 ipm
LTR: 194 ipm
Target volume per month 1,000K - 10,000K A4 / LTR
Warm-up time Cold printer: up to 30 minutes
Warm printer: approximately 6 minutes
First print out time, C1 inks Less than 116 seconds, simplex printing
Less than 134 seconds, duplex printing
First print out time, B2 inks Less than 76 seconds, simplex printing
Less than 94 seconds, duplex printing
Print Process
Specification Value
Maximum print width 323 mm / 12.71"
Maximum print length 496 mm / 19.53"
Maximum printable area 323 mm x 496 mm / 12.7" x 19.5"
Distance between edge
and image
2 mm / 0.0787" in X- and Z-direction
Image-to-image registra-
tion
Less than approximately 40 µm / 0.00157" between two colors
Sheet-to-image registration Less than approximately 1 mm / 0.04"
Ink Proprietary aqueous pigment ink in four colors, cyan, magenta,
yellow, and black
ColorGrip Optional: ColorGrip (CG)
Print order of colors (CG) YMCK
Print modes CMYK, K or combined (CMYK and K prints are separately counted)
4
Specifications
422
Chapter 15 - References
To Next Page
Loading...
Need help?
General