Configure the energy save timers
Use energy save timers to automatically shut down and awake the printer for the recurring
periods that the printer is not productive, for example overnight or over the weekend. The timers
ensure that you save energy and that the printer is ready when the first jobs are planned. When
you manually awake a printer in shut-down mode, the warm-up time can be longer than you
wish.
1. Enable and configure the sleep mode. (
Configure the sleep mode
on page 326)
2. Use the [Automatic wake-up] function to enable the automatic wake up from sleep mode.
[424] Automatic awakening
3. Use the [Automatic shutdown] function to enable the automatic shut down.
[425] Automatic shutdown
4. Set the wake-up timers. Indicate for each day if an automatic wake-up occurs. Define the
wake-up time per day.
[426] Automatic wake-up time
5. Set the shut-down timers. Indicate for each day if an automatic shut down occurs. Define the
shut-down time per day.
[427] Automatic shutdown per day
Configure the energy save timers
Chapter 12 - Save energy
327
To Next Page
Loading...
Need help?
General