Log out or switch roles
When you are finished, it is important to log out to end the session. It is also possible to
authenticate again with an other user account without leaving the application.
The session timeout period determines how long you remain logged in without using the printer.
Log out on the control panel and the Settings Editor
1. • On the control panel touch the name of your user account.
• In the Settings Editor click the name of your user account.
2. Touch or click [Log out].
Log out on control panel when you use a PKI smart card
Remove your PKIsmart card from the reader.
Log out on control panel when you use an NFC smart card
Hold your NFC smart card next to the reader attached to the printer or touch [Log out].
Log out in Remote Manager
Click [Log out].
Switch roles to change settings
When you are in the Settings Editor or on the control panel and you want to change a function for
which you do not have sufficient rights, you can log in again with other credentials. Therefore,
you need to have an other user account that is authorized for these kind of functions.
Log out or switch roles
Chapter 4 - Getting started
53
To Next Page
Loading...
Need help?
General