Calibrate a media family
The goal of the media family calibration is to ensure that the color reproduction of media remains
stable over time. (
Learn about media family calibration
on page 222)
Media families and media print modes that need calibration have this symbol:
.
[280] Media family calibration
1. Load the target media and assign the target media to one of the paper trays.
The calibration chart can only be printed on media that are equal to or larger than 210.0 x
279.4 mm / 8.3 x 11.7".
2. Touch [System]→[Color adjustment]→[Media family calibration].
[281] Color adjustments
3. Select the media family and the media print mode.
4. Use the default media or touch the [Media for calibration] drop-down list to select other target
media.
5. Touch [OK].
Calibrate a media family
Chapter 9 - Print what you expect
225
To Next Page
Loading...
Need help?
General