Action
5 Press the green button to confirm that you
placed a full container.
The LED blinks slowly for about 10 seconds
while the RFID tag of the container is read. Then
the LED remains on.
NOTE
When the LED continues to blink fast,
there is important information that you
need to read on the control panel.
6 Close the doors of the ink cabinet.
After you finish
The container package contains a sticker. Use this sticker on an empty ink container to reuse as a
waste container. Place the sticker over the present sticker.
Replace a container in the ink cabinet with doors
Chapter 13 - Maintain the printer
339
To Next Page
Loading...
Need help?
General