Color Action required
Red warns that you must perform an action immediately because the printer no
longer can print. The following actions can be needed:
1. Load media.
2. Remove prints.
3. Replace containers.
4. Replace tissue ribbon cassettes.
5. Replace waste containers.
6. Remove sheets from the system tray or the sentry tray.
7. Solve a paper jam.
Schedule
The schedule is the daily up to eight-hour plan board of the control panel and PRISMAsync
Remote Manager. It shows the list of scheduled jobs and predicts the job production time.
Furthermore, you see the upcoming events, such as loading paper trays or removing prints from
the output trays. (
Work with the schedule in document printing mode
on page 142)
The orange warning color informs you about the upcoming actions.
[32] Schedule
Required maintenance
The dashboard shows messages and symbols when a maintenance action is expected soon or
must be done immediately. When the printer cannot continue printing because supplies need to
be refilled, or waste must be removed, an action required window with instructions appears. To
prevent the printer from stopping, check the filling levels of supplies and waste on a regular base.
Learn about the printer status
58
Chapter 4 - Getting started
To Next Page
Loading...
Need help?
General