NOTE
To define the [Back side ({0})], touch the chain symbol to unlock the front side and
back side fields.
4. Touch [OK].
Use the [Image shift] function
The [Image shift] function shifts the entire imposition that is composed of the source file page or
pages. The maximum image shift is +/- 100 mm / 3.94".
The image shift of the front side and back side are coupled by default. To unlock the relationship,
touch the chain symbol:
[238] Adjust the margins
1. Press [Shift].
2. Use the [Image shift] function in horizontal direction ( ) or vertical direction ( ).
3. Touch the [Front ({0})] field to enter a value or use the - and + buttons. This value is also
displayed in the [Back side ({0})] field.
NOTE
To define the [Back side ({0})], touch the chain symbol to unlock the front side and
back side fields.
4. Touch [OK].
Use the [Margin erase] function
The [Margin erase] function erases the margin of the source file page or pages. The maximum
margin erase is +/- 100 mm / 3.94".
Change the layout of the job
Chapter 8 - Document printing
203
To Next Page
Loading...
Need help?
General