• Failure to comply with the User Documentation;
• Work performed incorrectly on the machine;
• Unauthorized modifications.
The following labels are used in the machine to identify and categorize the level of the
seriousness of hazard:
Label Type Description
WARNING
Indicates a warning concerning operations that may lead to
injury or even death to persons if not performed correctly. To
use the machine safely, always pay attention to these warn-
ings.
WARNING
Electrical Warning
CAUTION
Hot Surface
CAUTION
Force From Above Hand Crush
CAUTION
Hand Entanglement Belt Drive
CAUTION
Cutting of Fingers or Hand Straight Blade
Label The following labels are used in the machine to warn service person‐
nel for safety risks (but are visible for Users)
Make sure to read the installation instructions, whenever this label is
applied on parts of the machine.
Translation:
Installation; See installation instructions before connecting to the
mains supply.
High leakage current. Earth connection
essential before connecting supply.
Courant de fuite élevé. Raccordement à la terre
indispensable avant le raccordement au réseau.
High Leakage current:
Warning: There can be a high electric current through a human body
when touching one or more accessible parts if earth connection is in-
terrupted.
Translation:
High leakage current. Earth connection essential before connecting
supply.
Persons for ITE certified Standard UL/IEC/EN 60950-1
•
Ordinary person
This User Documentation describes safeguards for the protection of an ordinary person.
Ordinary person is the term applied to all persons other than skilled persons. Ordinary persons
include not only users of the equipment, but also all persons who may have access to the
equipment or who may be in the vicinity of the equipment.
Chapter 2 - Safety and Environment Information
21
To Next Page
Loading...
Need help?
General