[259] Change the way of sorting
6. Use the [Offset stacking] to indicate if you want to apply offset stacking for each delivered set
or per group of sets.
[260] Change the way of stacking
7. Touch [Advanced settings].
8. Use the [Sheet order] to define the sheet order in the output tray:
• [Face up]: front side of first printed sheet is visible.
• [Face up reverse]: front side of last printed sheet is visible.
• [Face down]: back side of last printed sheet is visible.
• [Face down reverse]: back side of last document page is visible.
[261] Change the sheet order
9. Use the [Sheet orientation] to define the sheet orientation in the output tray.
• [Header up LEF]: long-edge feed direction, header of printed document pages points to the
back side of printer.
• [Header up SEF]: short-edge feed direction, header of printed document pages points to the
back side of printer.
Change the prints delivery for the job
Chapter 8 - Document printing
213
To Next Page
Loading...
Need help?
General