Grounding
WARNING
• Connect the power cord to a power outlet that is equipped with a protective earthing (PE)
terminal.
• This equipment is not designed for connection to an IT power system. An IT power system is
a voltage network in which the neutral wire is not connected to earth.
• Do not disconnect the machine separate grounding terminal. A warning is placed on the
machine beneath the power marking label "High leakage Current. Earth connection essential
before connecting supply".
• It is the responsibility of the customer to provide a suitable building installation (reliable
protective earthing connection) in accordance with local legislation.
Installation
WARNING
• The machine may only be transported, assembled, installed and repaired by an authorized
service representative.
• The installation of accessories and options not permitted for the machines may constitute a
violation of the Safety Regulations and Directives, and may also damage the machine.
• Consult your authorized service representative for details on which accessories and options
are permitted for the machine.
• Only connect products which meet the national and international product safety and radio
frequency interference standards.
• Only use cables as specified by the manufacturer.
• Place the machine on a horizontally level surface of sufficient support.
• Do not place the machine in a location that is subject to vibrations and shocks.
Space requirements and operation precautions
• The required operating space of this product will be communicated to each customer by the
local sales representative during the Site Survey.
• Please refer to the corresponding Product Safety Data Sheets (PSDS) for specific safety
information, including the dimensions of the product, the recommended room volume and
ventilation rate.
IMPORTANT
• Do not obstruct the operating and service clearance areas in any way.
• Do not obstruct the cooling ducts, since this may result in overheating or malfunction.
• Make sure the exhaust suction is switched on during operation of the machine.
Chapter 2 - Safety and Environment Information
23
To Next Page
Loading...
