[292] Purging of a nozzle (A) and wiping the drops with dry tissue (B)
A role of tissue ribbon is enclosed in a cassette. For each ink two cassettes (labeled L and R) are
available to clean the nozzle plate. When the tissue ribbons in the L or R cassettes are used up,
the cassettes must be replaced.
Example: printhead maintenance
To understand how the printhead maintenance procedures of the printer are organized, use the
scheme below where six printer scenarios are described.
F
09:00 10:00 11:00
E
102
µm
SRA3A4
260
µm
200
ipm
300
ipm
D
08:00 09:00 10:00 11:00 12:00 13:00 14:00
C
05:00 07:00 09:00 11:00 13:00 15:00 17:00
B
18:00 19:00 18:00 19:00
A
04:00 05:00 06:00 07:00 08:00 09:00 10:00
[293] Automatic printhead maintenance
A. Starting up the printer. Awaking from sleep mode starts with a wet tissue wipe when the last
wet tissue wipe was longer than eight hours ago.
B. Going to sleep mode. When the sleep mode is activated—by a user or the sleep mode timer—a
wet tissue wipe occurs.
Learn about printhead maintenance
238
Chapter 9 - Print what you expect
To Next Page
Loading...
Need help?
General