Media settings Description
[Cycle length] Enter the cycle length in case the media are tab paper.
[Punch holes] Enter the number of holes in case the media are pre-punched.
[Standard color] Select the color of the media. Select the [Custom] to define the
color yourself.
A color sample is shown.
[344] Pre-defined media color
[Representation color] When you selected the media color: [Custom], you can select a
media color or enter the RGB value of the media color.
A color sample is shown.
[345] Define the media color
Define media in the media catalog
Chapter 10 - Manage media definitions
271
To Next Page
Loading...
Need help?
General