Oce VarioPrint i Series User Manual

[364] Edit a custom media print mode
4. You can read the values of the media print mode parameters.
5. Click [OK].
NOTE
Ensure you calibrate a changed media print mode before you use it in a job. (
Calibrate a media
family on page 225)
Delete media print modes
You cannot delete media print modes that came from media pack or the default media print
mode.
1. Select one or more media print modes.
2. Click [Delete].
[365] [Media families] menu
Define the media print mode settings
[General] settings Description
[Name] Enter a name for the media print mode.
[Description] Enter a description for the media print mode.
[Use as default media print
mode]
Indicate if this media print mode must be used as default media
print mode. The default media print mode cannot be disabled.
[Media print mode ena-
bled]
Indicate if this media print mode is enabled or disabled. The de-
fault media print mode cannot be disabled.
[Calibration information] Description
[Output profile] Select one of the output profiles that are in the list.
[Last calibration date] This field shows when the last media family calibration for the me-
dia print mode has been performed.
4
Define a media print mode
280
Chapter 10 - Manage media definitions

Oce VarioPrint i Series Specifications

General

Brand	Oce
Model	VarioPrint i Series
Category	Printer
Language	English