Action
2 1. Turn the ring to unlock the drop catcher.
2. Pull out the drop catcher from the container.
NOTE
Ensure that the drop catcher does not
touch the floor.
3 Carefully pour the demineralized water into the
container.
IMPORTANT
Do not fill above the maximum level
mark, otherwise machine parts could
get wet.
4 1. Place the drop catcher onto the container.
2. Fasten the ring to lock the drop catcher.
5 Push the air supply tube into the blue ring of the
connector.
Refill the conditioning liquid in the paper module container
Chapter 13 - Maintain the printer
351
To Next Page
Loading...
Need help?
General