Action
3 Place a large sheet of paper (A3 / 11" x 17" or larger)
underneath the print belt to collect dirt.
4 1. Use a dry cleaning cloth to clean the print belt surface.
2. Manually move the print belt aside to clean the entire surface.
3. If the print belt is still dirty, moisten a new cleaning cloth with PML and clean the print
belt surface again.
5 Remove the sheet underneath the print belt.
6 Close the upper and lower doors of the print module.
After you finish
Dispose the used cleaning cloths.
Clean the surface of the print belt
394
Chapter 13 - Maintain the printer
To Next Page
Loading...
