Optek C4101 - Explanation of the Converter Model Number

Using the instruction manual
- 2 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
1.2 Explanation of the converter model number
The model number is set up as follows:
* 0 = no inputs; 2 = 2 mA und 7 remote inputs
Converter C4222 is thus a C4000 series converter with inputs for two sensors
as well as 2 mA-inputs, 7 remote inputs and 2 lamp outputs.
The model number indicates the hardware configuration of your converter.
Note!
On PROFIBUS
®
PA converters, there is a PROFIBUS
®
PA interface provided
instead of mA- and remote inputs! Model number is C4_5_.
model number: C4 _ _ _
Number of
inputs for optek-
sensors
Number of
mA- and remote
inputs*
Number of
lamp outputs