Software Version C
- 183 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.14.4 Messages triggering system alarm
A system alarm is triggered when a system error can cause imprecise or wrong
measuring results. System alarm is also triggered when technically relevant
functions cannot be executed properly anymore.
System alarm is triggered by:
• all lamp failures (1001 - 1011)
• communication errors (1101 – 1105, 2011, 2012)
• erroneous or unreadable hardware calibration data (1710 – 1754)
• erroneous or unreadable system settings data (3201 – 3220)
• erroneous or unreadable product configuration data,
linearizations and sensor adaptations (3230 – 3250).
Error messages regarding SIGNAL LOSS cannot trigger a system alarm,
since it is an admissible operational state in many applications!
To Next Page
