Software Version C
- 105 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
4. Press [ENTER] and type in the integration time via the numerical keyboard.
Times from 0.0 to 99.9 seconds are possible.
Note!
When you type in 0.0 for integration time, damping is switched off!
Fig. 106 Entering the integration time for damping
5. Save the setting. The SYSTEM SETTINGS menu appears.
9.10.5 Lamp voltage
This menu is described in chapter 9.4.3, page 46.
SYSTEM SETTINGS
ALL MEASURING RESULTS ARE DAMPED AS
FOLLOWS:
DAMPING
DAMPING (SEC) 1.0
REJECT P01 SAVE
To Next Page
