Using the instruction manual
- 1 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
1 Using the instruction manual
1.1 Validity of the instruction manual
This instruction manual is valid for optek-converter C4101.
Follow the instruction manual for every operation. If the converter is not used as
described in this instruction manual, your safety and the converter function could
be affected.
To keep up reliability of the product, enhance its life cycle and avoid down times,
you have to follow the instructions given in this manual.
Depending on the option, the following instruction manuals shall be observed for
converters of the Control 4000 series:
Furthermore, please follow the existing accident prevention and environmental
protection instructions, as well as recognized technical instructions for safe and
professional working.
Tab. 1 Overview of instruction manuals
Product Instruction manual (manual) overview
Converter of the Control 4000 series Manual of corresponding converter
Option:
C4000 PC-Transfer software
(Basic or Advanced version)
manual C4000 PC-Transfer software
Option:
Control 4000 PROFIBUS
®
PA manual PROFIBUS
®
PA
Option: Control 4000 EX EN-D manual C4000-EX EN-D
Option: Control 4000 EX FM-D manual C4000-EX FM-D
Option: Control 4000 ATEX EEx d manual C4000-EX ATEX EEx d
To Next Page
