Optek C4101 - Displaying the Data Logger

Software Version C
- 91 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.8.2 Displaying the data logger
With this function, the measuring results from the data logger ring buffer
1. Select DATA LOGGER DISPLAY from the main menu and press [ENTER].
Note!
You have no access when you have set the interval in the SYSTEM
SETTINGS \ DATA LOGGER menu to "- - -". To enable the data logger, set a
time for the interval.
Fig. 87 Choosing data logger display
2. Select a measuring result and press [ENTER].
The M01 - M04 TO PC function makes it possible to display trends of all four
measuring results simultaneously online on your PC with an interval of one
second.
Fig. 88 Data logger display – choosing measuring results
MAIN MENU
MEASUREMENT DISPLAY
DATA LOGGER DISPLAY
SYSTEM INFORMATION DISPLAY
PRODUCT CHANGE
PRODUCT CONFIGURATION
SYSTEM SETTINGS
MAINTENANCE
LANGUAGE / SPRACHE
20:05:2006 P01 11:26:55
DATA LOGGER DISPLAY
SELECT MEASURING RESULT TO
BE DISPLAYED
M01
M02
M03
M04
M01-M04 TO PC
20:05:2006 P01 11:26:55