Optek C4101 - Sensor Data Display

Software Version C
- 99 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.9.3 Sensor data display
In this menu, you can view information on the sensors installed. Here, you can
only view the data but not change it.
1. Select the SYSTEM DATA SENSORS menu item in the SYSTEM
INFORMATION DISPLAY menu and press [ENTER].
Fig. 97 Menu system information display, choosing system data sensors
2. The SYSTEM INFORMATION DISPLAY - SYSTEM DATA SENSOR 1
menu appears. Scroll up or down to view information on other sensors if
connected to your converter.
You can enter and update sensor data in the SYSTEM SETTINGS menu.
Fig. 98 Menu system information - settings
3. Press [CLEAR] to return to the previous menu.
SYSTEM INFORMATION DISPLAY
CONFIGURATION
SYSTEM SETTINGS
SYSTEM DATA SENSORS
20:05:2006 P01 11:26:55
SYSTEM INFORMATION DISPLAY
SYSTEM DATA SENSOR 1
MODEL :
SERIAL NO :
OPL : mm
WAVELENGTHS : nm
OPTEK INPUTS :
CABLE LENGTH : m
LAMP OUTPUT :
20:05:2006 P01 11:26:55