Optek C4101 - Measurement Display; Selecting Display Mode

Software Version C
- 88 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.7 Measurement display
9.7.1 Selecting display mode
With this function, the current measurement / measurements can be displayed.
1. Select MEASUREMENT DISPLAY from the main menu and press [ENTER].
Fig. 85 Choosing measurement display
2. The current measurement(s) status is displayed. Depending on the entry
you have made in the DEFINE DISPLAY menu (see chapter 9.5.7, page 82)
the results of one or more measurements appear.
Fig. 86 Measurement display
3. Press [CLEAR] to return to the main menu.
When you switch off the measuring system while the measuring results are
displayed, the measurement display appears after switching the converter on
again.
MAIN MENU
MEASUREMENT DISPLAY
DATA LOGGER DISPLAY
SYSTEM INFORMATION DISPLAY
PRODUCT CHANGE
PRODUCT CONFIGURATION
SYSTEM SETTINGS
MAINTENANCE
LANGUAGE / SPRACHE
20:05:2006 P01 11:26:55
20:05:2006 P01 11:26:55
M01
1.37 CU
0.00
5.00