Software Version C
- 87 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
2. Select a product you want to measure / display and press [ENTER].
Fig. 83 Choosing a product
3. The selection menu appears again. Save the setting. The main menu
appears and the enabled product is displayed in the center of the status bar.
Fig. 84 Confirming product change
PRODUCT CHANGE
SELECT THE PRODUCT YOU WANT TO
MEASURE
P01
P02
P03
P04
P05
P06
20:05:2006 P01 11:26:55
PRODUCT CHANGE
SELECT THE PRODUCT YOU WANT TO
MEASURE
PRODUCT : P01
WILL BE ACTIVATED
REJECT P01 SAVE
To Next Page
