Optek C4101 - Status Feedback Via Ma-Output

Software Version C
- 174 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.12.2.4 Status feedback via mA-output
When the PROD_FEEDBACK function is set during definition of the measuring
results in the FUNCTION menu item of the PRODUCT CONFIGURATION
menu, the current product measured in the "measuring range" 0-16 is displayed.
The results are corresponding values in the data logger or at the mA-output:
Tab. 19 Values in the data logger or at the mA-output
Current product
Measuring result
PROD.
Data logger 0-20 mA 4-20 mA
Product 1 1 PROD 1 PROD 1.25 5.00
Product 2 2 PROD 2 PROD 2.50 6.00
Product 3 3 PROD 3 PROD 3.75 7.00
Product 4 4 PROD 4 PROD 5.00 8.00
Product 5 5 PROD 5 PROD 6.25 9.00
Product 6 6 PROD 6 PROD 7.50 10.00
Product 7 7 PROD 7 PROD 8.75 11.00
Product 8 8 PROD 8 PROD 10.00 12.00