Optek C4101 - Connecting the Voltage Supply 24 V AC; DC (Option)

Wiring
- 22 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
7.3 Connecting the voltage supply 24 V AC / DC (option)
Danger!
Electrical voltage!
Switch the converter voltage-free before connecting the sensor!
Install electrical connections only by qualified electricians!
Tool • Screw driver
1. Check if the voltage is 24 V AC / DC.
2. Connect the power supply to the power supply socket (12).
Fig. 14 Connecting the power supply 24 V AC / DC
2119 20
M6
PA
PE
L
N
24 V, DC / 50 / 60 Hz, 50 VA
24 V, T 3,15 A
!
12