Optek C4101 - Factory Settings; Define Measuring Result Menu; Lim. Value Menu

Software Version C
- 175 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.13 Factory settings
9.13.1 Define measuring result menu
The factory settings for the 4 measuring results in the 8 products are set to
measuring function ABS-CU (A) in the measuring range from 0 to 5.0 CU.
Linearizations, mA-inputs and slope + offset are not active.
Fig. 182 Menu measuring result M01
9.13.2 Lim. value menu
There are no factory settings for limit values.
Fig. 183 Limit value – define figure
MEASURING RESULT: M01
DEFINE NAME: M01
FUNCTION ABS -CU (A)
X mA INPUT ---
X LINEARIZATION ---
X SLOPE + OFFSET ---
RANGE BEGIN / END 0.0 5.0
UNIT CU
FORMAT +99.99
REJECT P02 SAVE
LIM. VALUE: G01
MEASUR. RESULT - - - -
RANGE BEGIN - - - -
RANGE END - - - -
UNIT - - - -
LIMIT VALUE - - - -
ALARM AFTER SEC. - - - -
ALARM TYPE - - - -
REJECT P01 SAVE