Technical data
- 13 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
5.1 Possible sensors
One or more of the following optek-sensors can be connected to the converter:
Connecting flameproof sensors to the converter is prohibited without EX design.
The meaning of the sensor options is described in the sensor manuals.
Tab. 4 Connectable sensors
Sensor options AF16-F / N
AS16-F / N
*
*. Two insertion depths available: OPL + 35 mm (1.38'') with port length 60 mm (2.36'')
OPL + 135 mm (5.31'') with port length 60 mm (2.36'')
AS16-BT-N* AS56-F / N
HT x
VA x
HT-VA x
VB x x x
HT-VB x
PV x
HT-PV x
VA-PV x
HT-VA-PV x
VB-PV x
HT-VB-PV x
To Next Page
