Intended use
- 4 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
2 Intended use
The converter is to be used exclusively for optek-sensors according to the
technical data.
In combination with inline sensors for turbidity, concentration, color and UV
absorbance, the converter is used for displaying and processing measuring
results.
The converter may only be interfaced with sensors listed in the "Technical data".
The converter is to be installed in control cabinets with external switch, which
allows the user to disconnect power. Please refer to the "Technical data"
chapter.
This converter is not intended for use in explosion-proof areas.
Tampering or unauthorized substitution of parts or changes of the converter or
its software may affect the performance and result in unsafe operation.
The manufacturer is not liable for damage resulting from use contrary to the
intended use.
Following this instruction manual is part of the intended use.
To Next Page
