Software Version C
- 57 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
9.5.3.1 Define measuring result name
With this function, you can change the preset name of the measuring result M01
to M04 to a name of your choice. To do this, you can use 12 characters
maximum.
1. Select the DEFINE NAME menu item in the MEASURING RESULT menu
and press [ENTER].
2. The character field appears.
Fig. 51 Choosing define measuring result name
3. Enter a new name via the character field (see chapter 9.2, page 37).
4. Save the new name of the measuring result.
5. After saving, the character field is closed and the FUNCTION menu item in
the MEASURING RESULT_ _ _ menu is marked.
MEASURING RESULT: M01
DEFINE NAME: M01
FUNCTION
ABCDEFGHIJKLMNOPQ
RSTUVWXYZ ()
+ - / *0123456789 .%
X mA INPUT
X LINEARIZATION
X SLOPE + OFFSET <<< >>> DEL OK
RANGE BEGIN / END 0.0 5.0
UNIT CU
FORMAT +99.99
REJECT P01 SAVE
To Next Page
