Software Version C
- 56 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
Note!
If only mA-outputs 1 and 2 are available, only the measuring results M01 and
M02 can be sent to the control system.
You can always display M03 and M04 locally and record them on the data
logger!
3. The menu of the selected measuring result appears. Here it is the
MEASURING RESULT M01 menu.
Fig. 50 Menu measuring result M01
MEASURING RESULT: M01
DEFINE NAME M01
FUNCTION ABS -CU (A)
X mA INPUT ---
X LINEARIZATION ---
X SLOPE + OFFSET ---
RANGE BEGIN / END 0.0 5.0
UNIT CU
FORMAT +99.99
REJECT P02 SAVE
To Next Page
