Software Version C
- 55 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
1. Select the DEFINE MEASURING RESULT function in the PRODUCT menu
and press [ENTER].
Fig. 48 Choosing define measuring result
2. The DEFINE MEASURING RESULT menu appears. Select a measuring
result (M01 – M04) and press [ENTER].
Fig. 49 Choosing a measuring result to be defined
PRODUCT: P01
DEFINE PRODUCT NAME
DEFINE MEASURING RESULT
DEFINE LINEARIZATION
DEFINE OFFSET + SLOPE SET
DEFINE LIMIT VALUES
DEFINE DISPLAY
DISPLAY FORMULA
DISPLAY L21 - L28
20:05:2006 P01 11:26:55
DEFINE MEASURING RESULT
SELECT THE MEASURING
RESULT TO BE DEFINED
M01
M02
M03
M04
20:05:2006 P01 11:26:55
To Next Page
