Optek C4101 - Zero Point

Software Version C
- 111 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
4. Select one of the given functions and press [ENTER]. The cursor moves to
SENSOR.
5. Press [ENTER]. A list appears. The sensor is automatically assigned
correctly when entering the scattered light parameter and does not need to
be selected here (see "Calibration scattered light", chapter 9.11.5,
page 142). TF16-OPL40 and TF16-OPL50 are reserved for the future.
Fig. 113 Entering the sensor
6. Press [ENTER]. The cursor moves to MEDIUM.
7. Press [ENTER]. A list appears.
Fig. 114 Entering the medium
8. Select one of the given media and press [ENTER]. The cursor moves to
ZERO POINT.
9. Press [ENTER]. A list appears.
10. Select the zero setting mode FACTORY or USER and press [ENTER].
SYSTEM SETTINGS
FUNCTION TURB A/C
SENSOR TF16
TF16-OPL40
TF16-OPL50
MEDIUM
ZERO POINT
REJECT P01 SAVE
SENSOR TF
FUNCTION TURB A/C
SENSOR TF16
MEDIUM PPM (DE)
FTU
EBC
ZERO POINT
REJECT P01 SAVE