Software Version C
- 103 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
Note!
When selecting "- - -", the DATA LOGGER function and the trend display are
switched off. All data is erased!
4. Select one interval from the given times and press [ENTER].
The cursor moves to DATA LOGGER RESET.
5. Press [ENTER]. A list appears.
6. If you select YES, all previous data is erased, if you select NO, new data
recording is not started.
7. Save the setting. The SYSTEM SETTINGS menu appears.
Fig. 103 Resetting the data logger
SYSTEM SETTINGS
SELECT THE INTERVAL YOU WANT TO
STORE DATA
CURRENT SETTING IS: 01 SEC
INTERVAL:
DATA LOGGER
RESET
REJECT P01 SAVE
To Next Page
