Software Version C
- 132 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
6. Via the character field, enter a new name for the DEVICE MESSAGE. It is
saved with the relative index 21 of the physical block (see instruction manual
PROFIBUS
®
PA).
7. After entering the text, select OK and press [ENTER].
The character field is closed and the cursor moves to the DEVICE
INSTALLATION DATE menu item.
8. Press [ENTER].
The character field appears.
9. Via the character field, enter a date as the DEVICE INSTALLATION DATE.
It is saved with the relative index 22 of the physical block (see instruction
manual PROFIBUS
®
PA).
10. Save the settings.
The SYSTEM SETTINGS menu appears.
Note!
The entries serve to describe the field device and can be read out with the
corresponding indices of the physical block of the field device (see instruction
manual PROFIBUS
®
PA).
To Next Page
