Description of the converter
- 8 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
With the help of product change, the converter can be switched to another
measuring range and a completely different measuring method. This is useful
when the process medium is changed or the batch process is switched. When
the product is changed, new limit values, measuring ranges, physical units and
measuring results processings are taken into account. You can define different
product parameters for each output in 8 different files.
The data logger records the four measuring ranges in a selectable time period
and displays them graphically on the display. This way, you can monitor the
process and compare changes to the measuring results. This provides the
opportunity to detect existing correlations and thus to define new parameters for
process control and monitoring.
The system provides access protection by means of passwords protecting
operating levels for monitoring, routine settings and experts.
The converter fulfills the highest security standards. The device complies with
the requirements of the EMC Directive in accordance with CE and NAMUR.
The self-diagnostics system monitors converter as well as sensor processes.
To Next Page
