Appendix
- 195 -
optek-converter C4101 Version 07.2009_1.2US, 23.07.2009
www.optek.com
TRANSLATION FOR INFORMATION PURPOSES ONLY
This translation of Annex 1 to Certificate No: 44 324 09 368311 with file
reference 2.4-857/99 is a translation not authorized by TÜV NORD CERT
GmbH.
Type designation: Control 4000 (C4XYZ), Haze Control (HC4XYZ); or
Fermenter Control (FCXY)
with X = {1, 2, 3, 4}; Y = {0, 2, 5, 6}; Z = {1, 2}
Rating: 115 / 230 V~ or 24 V DC, 50 VA
class I or III
protection I P 20
Description: Photometric measuring system for detecting absorbance or
turbidity in liquids and gases.
Sensors, consisting of light transmitter and receiver, are
installed in an armature which is then installed in the piping
system.
Voltage supply of the light transmitters is 5 V.
XYZ in the type designation stand for number of optek sensor
inputs (X), number of interface inputs or interface types (Y)
and number of lamp outputs (Z).
Haze and Fermenter variants differ in inscription details and
an additional resistance in the output circuit of the lamp
supply.
Interface cards: IO 24 for SELV/PELV-supplied system busses
IO 12 with 2 conventional current inputs and 7 remote inputs
in the SELV range
Modification 3.09
To Next Page
