_____________________________________________________________________________
LB9 User’s Guide 1017/1523
11.2.5.2 Defining Authentication List Configuration Page
You use this screen to configure login lists. A login list specifies the authentication method(s) you want
used to validate switch or port access for the users associated with the list. The pre-configured users,
admin and guest, are assigned to a pre-configured list named defaultList, which you may not delete. All
newly created users are also assigned to the defaultList until you specifically assign them to a different
list.
Access Mode- A login list or enable list specifies the authentication method(s) you want used to validate
switch or port access for the users associated with the list. The pre-configured users, admin and
guest, are assigned to a pre-configured list named defaultList, which you may not delete. All newly
created users are also assigned to the defaultList until you specifically assign them to a different list
Authentication List - Select the authentication list you want to configure. Use dropdown menu to
select defaultList, networkList, enableList, Create. Select 'create' to define a new list. When you
create a new list, 'undefined' is set initially.
Method 1 - Use the dropdown menu to select the method that should appear first in the selected
authentication login list. If you select a method that does not time out as the first method, such as
'local' no other method will be tried, even if you have specified more than one method. Note that this
parameter will not appear when you first create a new login list. The options are:
Enable- uses the enable password for authentication.
Line- uses the Line password for authentication.
Local- the user's locally stored ID and password will be used for authentication
Radius- the user's ID and password will be authenticated using the RADIUS server instead of
locally
Tacacs- the user's ID and password will be authenticated using the TACACS server instead of
locally
None- no authentication is used.
Undefined- the authentication method is unspecified (this may not be assigned as the first
method)
LDAP- the user's ID and password will be authenticated using the LDAP server.
Method 2 –Use the dropdown menu to select the method, if any, that should appear second in the
selected authentication list. This is the method that will be used if the first method times out. If you
select a method that does not time out as the second method, the third method will not be tried.
To Next Page
Loading...
Need help?
General