_____________________________________________________________________________
LB9 User’s Guide 1038/1523
Unicast Packets Transmitted - The total number of packets that higher-level protocols requested
be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Multicast Packets Transmitted - The total number of packets that higher-level protocols requested
be transmitted to a Multicast address, including those that were discarded or not sent.
Broadcast Packets Transmitted - The total number of packets that higher-level protocols
requested be transmitted to the Broadcast address, including those that were discarded or not sent.
Transmit Packets Discarded - The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a
higher-layer protocol. A possible reason for discarding a packet could be to free up buffer space.
Most Address Entries Ever Used - The highest number of Forwarding Database Address Table
entries that have been learned by this switch since the most recent reboot.
Address Entries in Use - The number of Learned and static entries in the Forwarding Database
Address Table for this switch.
Maximum VLAN Entries - The maximum number of Virtual LANs (VLANs) allowed on this switch.
Most VLAN Entries Ever Used - The largest number of VLANs that have been active on this switch
since the last reboot.
Static VLAN Entries - The number of presently active VLAN entries on this switch that have been
created statically.
Dynamic VLAN Entries - The number of presently active VLAN entries on this switch that have
been created by GVRP registration.
VLAN Deletes - The number of VLANs on this switch that have been created and then deleted since
the last reboot.
Time Since Counters Last Cleared - The elapsed time, in days, hours, minutes, and seconds,
since the statistics for this switch were last cleared.
Command Buttons
Clear Counters - Clear all the counters, resetting all switch summary and detailed statistics to
default values. The discarded packets count cannot be cleared.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General