_____________________________________________________________________________
LB9 User’s Guide 1085/1523
Extended PoE PSE - Specifies if extended PSE TLV is present in LLDP frame.
Available - Specifies available power sourcing equipment's power value in tenths of watts on the
port of local device.
Source - Specifies power source of this port.
Priority - Specifies PSE port power priority.
Extended PoE PD - Specifies if extended PD TLV is present in LLDP frame.
Required - Specifies required power device power value in tenths of watts on the port of local
device.
Source - Specifies power source of this port.
Priority - Specifies PD port power priority.
Command Buttons
Refresh - Updates the information on the page.
To Next Page
Loading...
Need help?
General