_____________________________________________________________________________
LB9 User’s Guide 1122/1523
11.3.4.2 Configuring DHCP Snooping Information Option 82 Interface
Selection Criteria
Interface - Selects the interface for which data is to be displayed or configured.
Configurable Data
DHCP Snooping Information Option 82 Mode – Enables or Disables DHCP Snooping Information
Option 82 Mode on selected interface. The factory default is Disable.
DHCP Snooping Information Option 82 Trust Mode - If this is Enabled, DHCP Snooping
Information Option 82 application considers selected port as trusted. The factory default is Disable.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...