_____________________________________________________________________________
LB9 User’s Guide 1123/1523
11.3.4.3 Configuring DHCP Snooping Information Option 82 VLAN
Selection Criteria
VLAN ID - Selects the VLAN for which data is to be displayed or configured.
Configurable Data
DHCP Snooping Information Option 82 Mode - Enables or Disables the DHCP Snooping
Information Option 82 feature on selected VLAN. The factory default is Disable.
DHCP Snooping Information Option 82 Circuit-Id - Enables or Disables the DHCP Snooping
Information Option 82 Circuit-Identifier feature on selected VLAN. The factory default is Disable.
DHCP Snooping Information Option 82 Remote-Id - Sets or Resets the DHCP Snooping
Information Option 82 Remote-Identifier string on selected VLAN. The factory default is NULL string.
Range is (0 to 32 characters).
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General