_____________________________________________________________________________
LB9 User’s Guide 1129/1523
Include - This port is always a member of this VLAN. This is equivalent to registration
fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies that port may be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless it receives a GVRP request. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Tagging - Select the tagging behavior for this port in this VLAN. The factory default is 'Untagged'.
The possible values are:
Tagged - all frames transmitted for this VLAN will be tagged.
Untagged - all frames transmitted for this VLAN will be untagged
Non-Configurable Data
Interface - Indicates which port is associated with the fields on this line.
Status - Indicates the current value of the participation parameter for the port.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete - Delete this VLAN. You are not allowed to delete the default VLAN.
To Next Page
Loading...
Need help?
General