_____________________________________________________________________________
LB9 User’s Guide 1211/1523
Peer-Link BPDU Guard: Indicates whether loop guard mode on peer link port is enabled or
disabled of MLAG peer devices.
Peer-Link BPDU Filter Mode: Indicates whether BPDU filter mode on peer link port is enabled
or disabled of MLAG peer devices.
Peer-Link BPDU Flood Mode: Indicates whether BPDU flood mode on peer link port is enabled
or disabled of MLAG peer devices.
The parameter of single MLAG ID include—
Port Mode: Indicates whether port mode on MLAG member is enabled or disabled of MLAG peer
devices.
Root Guard: Indicates whether root guard mode on MLAG member is enabled or disabled of
MLAG peer devices.
Loop Guard: Indicates whether loop guard mode on MLAG member is enabled or disabled of
MLAG peer devices.
BPDU Guard: Indicates whether BPDU guard mode on MLAG member is enabled or disabled of
MLAG peer devices.
BPDU Filter Mode: Indicates whether BPDU filter mode on MLAG member is enabled or
disabled of MLAG peer devices.
BPDU Flood Mode: Indicates whether BPDU flood mode on MLAG member is enabled or
disabled of MLAG peer devices.
VTP - Check the switch configuration about VTP for consistency parameter.
The parameter of global include—
Admin Status: Indicates whether administrative mode is enabled or disabled of MLAG peer
devices.
Operating Mode: Displays the VTP operating mode of MLAG peer devices, which can be
server, client, or transparent.
Pruning Mode: Displays whether pruning is enabled or disabled of MLAG peer devices.
V2 Mode: Displays if VTP version 2 mode is enabled of MLAG peer devices.
Domain Name: Displays the name that identifies the administrative domain of MLAG peer
devices.
Password: Displays the VTP domain password of MLAG peer devices.
The parameter of single MLAG ID include—
Port Trunk Mode: Indicates whether trunk mode is enabled or disabled on MLAG member of
MLAG peer devices.
Local Value - -Get the parameter value in local side.
Peer Value - Get the parameter value in peer side.
Command Buttons
Refresh - Update the data.
To Next Page
Loading...