_____________________________________________________________________________
LB9 User’s Guide 1228/1523
Invalid EAPOL Frames Transmitted - This displays the number of EAPOL frames that have been
received by this authenticator in which the frame type is not recognized.
EAP Length Error Frames Received - This displays the number of EAPOL frames that have been
received by this authenticator in which the frame type is not recognized.
Supplicant Port Access Control Statistcs: If the Port is a Supplicant.
EAPOL Frames Received - This displays the number of valid EAPOL frames of any type that have
been received by this supplicant.
EAPOL Frames Transmitted - This displays the number of EAPOL frames of any type that have
been transmitted by this supplicant.
EAPOL Start Frames Received - This displays the number of EAPOL start frames that have been
received by this supplicant.
EAPOL Logoff Frames Received - This displays the number of EAPOL logoff frames that have
been received by this supplicant.
Last EAPOL Frame Version - This displays the protocol version number carried in the most
recently received EAPOL frame.
Last EAPOL Frame Source - This displays the source MAC address carried in the most recently
received EAPOL frame.
EAP Response/Id Frames Received - This displays the number of EAP response/identity frames
that have been received by this supplicant.
EAP Response Frames Received - This displays the number of valid EAP response frames (other
than response/identity frames) that have been received by this supplicant.
EAP Request/Id Frames Transmitted - This displays the number of EAP request/identity frames
that have been transmitted by this supplicant.
EAP Request Frames Transmitted - This displays the number of EAP request frames (other than
request/identity frames) that have been transmitted by this supplicant.
Invalid EAPOL Frames Received - This displays the number of EAPOL frames that have been
received by this supplicant in which the frame type is not recognized.
EAPOL Length Error Frames Received - This displays the number of EAPOL frames that have
been received by this supplicant in which the frame type is not recognized.
Command Buttons
Refresh - Update the information on the page.
Clear All - This button resets all statistics for all ports to 0. There is no confirmation prompt. When
this button is pressed, the stats are immediately cleared.
Clear - This button resets the statistics for the selected port. There is no confirmation prompt. When
this button is pressed, the stats are immediately cleared.
To Next Page
Loading...
Need help?
General